Glossary of EM.Cube's Wizards

Microstrip Wizard

ICON:

MENU: Tools → Transmission Line Wizards → Microstrip Line

MODULE(S): EM.Tempo, EM.Picasso, EM.Ferma

FUNCTION: Creates the parameterized geometry of a microstrip line segment of a specified characteristic impedance on a conductor-backed single-layer dielectric substrate in the project workspace

NOTES, SPECIAL CASES OR EXCEPTIONS: In EM.Tempo and EM.Picasso, this wizard creates a one-port open-ended microstrip transmission line segment. In EM.Ferma, it sets up a 2D solution plane for quasi-static analysis of the microstrip transmission line. The width of the microstrip line is determined based on the specified characteristic impedance. It may be replaced by a numeric value instead.

PYTHON COMMAND(S):

emag_microstrip_tempo(h,er,z0,strip_len,feed_len,sub_len,sub_wid,draw_substrate)

emag_microstrip_picasso(h,er,z0,strip_len,feed_len)

emag_microstrip_ferma(h,er,z0,box_multiplier,draw_substrate)

MICROSTRIP WIZARD PARAMETERS

Parameter Name	Value Type	Units	Default Value	Notes
h	real numeric	meters	0.0015	substrate height (thickness)
er	real numeric	-	2.2	substrate relative permittivity
z0	real numeric	Ohms	50	characteristic impedance
strip_len	real numeric	meters	-	length of the line segment (only in EM.Tempo & EM.Picasso)
feed_len	real numeric	meters	-	length of feed line (only in EM.Tempo)
sub_len	real numeric	meters	-	length of substrate (only in EM.Tempo & EM.Ferma)
sub_wid	real numeric	meters	-	width of substrate (only in EM.Tempo & EM.Ferma)
draw_substrate	Boolean	-	True	Adds substrate & ground plane

Two-Port Microstrip Wizard

ICON:

MENU: Tools → Transmission Line Wizards → Two-Port Microstrip Line

MODULE(S): EM.Tempo, EM.Picasso

FUNCTION: Creates the parameterized geometry of a two-port microstrip line segment of a specified characteristic impedance on a conductor-backed single-layer dielectric substrate in the project workspace

NOTES, SPECIAL CASES OR EXCEPTIONS: In EM.Tempo, the two ports are placed at the two edges of the substrate. The width of the microstrip lines is determined based on the specified characteristic impedance. It may be replaced by a numeric value instead.

PYTHON COMMAND(S):

emag_microstrip_2port_tempo(h,er,z0,strip_len,sub_len,sub_wid,draw_substrate)

emag_microstrip_2port_picasso(h,er,z0,strip_len,feed_len)

TWO-PORT MICROSTRIP WIZARD PARAMETERS

Parameter Name	Value Type	Units	Default Value	Notes
h	real numeric	meters	0.0015	substrate height (thickness)
er	real numeric	-	2.2	substrate relative permittivity
z0	real numeric	Ohms	50	characteristic impedance
strip_len	real numeric	meters	-	length of the line segment
feed_len	real numeric	meters	-	length of feed line (only in EM.Picasso)
sub_len	real numeric	meters	-	length of substrate (only in EM.Tempo)
sub_wid	real numeric	meters	-	width of substrate (only in EM.Tempo)
draw_substrate	Boolean	-	True	Adds substrate & ground plane

Coplanar Waveguide (CPW) Wizard

ICON:

MENU: Tools → Transmission Line Wizards → Coplanar Waveguide

MODULE(S): EM.Tempo, EM.Picasso, EM.Ferma

FUNCTION: Creates the parameterized geometry of a coplanar waveguide segment on a single-layer dielectric substrate in the project workspace

NOTES, SPECIAL CASES OR EXCEPTIONS: In EM.Tempo and EM.Picasso, this wizard creates a one-port open-ended CPW transmission line segment. In EM.Ferma, it sets up a 2D solution plane for quasi-static analysis of the CPW transmission line.

PYTHON COMMAND(S):

emag_cpw_tempo(h,er,strip_wid,slot_wid,strip_len,sub_len,sub_wid,draw_substrate)

emag_cpw_picasso(h,er,w,s,ls,lf)

emag_cpw_ferma(h,er,s,w,box_multiplier,draw_substrate)

CPW WIZARD PARAMETERS

Parameter Name	Value Type	Units	Default Value	Notes
h	real numeric	meters	0.0015	substrate height (thickness)
er	real numeric	-	2.2	substrate relative permittivity
strip_wid	real numeric	meters	0.002	width of the center strip
slot_wid	real numeric	meters	0.002	width of the slots
strip_len	real numeric	meters	-	length of the line segment (only in EM.Tempo & EM.Picasso)
sub_len	real numeric	meters	-	length of substrate (only in EM.Tempo & EM.Ferma)
sub_wid	real numeric	meters	-	width of substrate (only in EM.Tempo & EM.Ferma)
draw_substrate	Boolean	-	True	Adds substrate & ground plane

Two-Port Coplanar Waveguide (CPW) Wizard

ICON:

MENU: Tools → Transmission Line Wizards → Two-Port Coplanar Waveguide

MODULE(S): EM.Tempo, EM.Picasso

FUNCTION: Creates the parameterized geometry of a two-port coplanar waveguide segment on a single-layer dielectric substrate in the project workspace

NOTES, SPECIAL CASES OR EXCEPTIONS: In EM.Tempo, the two ports are placed at the two edges of the substrate.

PYTHON COMMAND(S):

emag_cpw_2port_tempo(h,er,strip_wid,slot_wid,strip_len,sub_len,sub_wid,draw_substrate)

emag_cpw_2port_picasso(h,er,w,s,ls,lf)

TWO-PORT CPW WIZARD PARAMETERS

Parameter Name	Value Type	Units	Default Value	Notes
h	real numeric	meters	0.0015	substrate height (thickness)
er	real numeric	-	2.2	substrate relative permittivity
strip_wid	real numeric	meters	0.002	width of the center strip
slot_wid	real numeric	meters	0.002	width of the slots
strip_len	real numeric	meters	-	length of the line segment
sub_len	real numeric	meters	-	length of substrate (only in EM.Tempo)
sub_wid	real numeric	meters	-	width of substrate (only in EM.Tempo)
draw_substrate	Boolean	-	True	Adds substrate & ground plane

Coaxial Wizard

ICON:

MENU: Tools → Transmission Line Wizards → Coaxial Line

MODULE(S): EM.Tempo, EM.Ferma

FUNCTION: Creates the parameterized geometry of a coaxial line segment of a specified characteristic impedance with a dielectric core in the project workspace

NOTES, SPECIAL CASES OR EXCEPTIONS: In EM.Tempo, this wizard creates a one-port open-ended coaxial transmission line segment. In EM.Ferma, it sets up a 2D solution plane for quasi-static analysis of the coaxial transmission line. The radius of the outer conductor is determined based on the specified characteristic impedance. It may be replaced by a numeric value instead.

PYTHON COMMAND(S):

emag_coax_2port_tempo(er,z0,r_inner,len)

emag_coax_ferma(er,z0,r_inner)

COAXIAL WIZARD PARAMETERS

Parameter Name	Value Type	Units	Default Value	Notes
er	real numeric	-	2.2	relative permittivity of the dielectric core
z0	real numeric	Ohms	50	characteristic impedance
r_inner	real numeric	meters	0.001	radius of inner conductor
len	real numeric	meters	-	length of the line segment (only in EM.Tempo)

Two-Port Coaxial Wizard

ICON:

MENU: Tools → Transmission Line Wizards → Two-Port Coaxial Line

MODULE(S): EM.Tempo

FUNCTION: Creates the parameterized geometry of a two-port coaxial line segment of a specified characteristic impedance with a dielectric core in the project workspace

NOTES, SPECIAL CASES OR EXCEPTIONS: The radius of the outer conductor is determined based on the specified characteristic impedance. It may be replaced by a numeric value instead.

PYTHON COMMAND(S): emag_coax_2port_tempo(er,z0,r_inner,len)

TWO-PORT COAXIAL WIZARD PARAMETERS

Parameter Name	Value Type	Units	Default Value	Notes
er	real numeric	-	2.2	relative permittivity of the dielectric core
z0	real numeric	Ohms	50	characteristic impedance
r_inner	real numeric	meters	0.001	radius of inner conductor
len	real numeric	meters	-	length of the line segment (only in EM.Tempo)

Rectangular Waveguide Wizard

ICON:

MENU: Tools → Transmission Line Wizards → Rectangular Waveguide

MODULE(S): EM.Tempo

FUNCTION: Creates the parameterized geometry of a rectangular waveguide segment slightly above the cutoff at the center frequency of the project

NOTES, SPECIAL CASES OR EXCEPTIONS: This wizard creates a one-port open-ended rectangular waveguide segment in EM.Tempo. The width of the waveguide is set slightly larger than half its cutoff wavelength for the dominant TE10 mode. The height is set equal to half its width. Both the width and height can be replaced by arbitrary numeric values.

PYTHON COMMAND(S): emag_rect_waveguide(wg_len,port_offset)

WAVEGUIDE WIZARD PARAMETERS

Parameter Name	Value Type	Units	Default Value	Notes
wg_len	real numeric	meters	-	length of the waveguide segment
port_offset	real numeric	meters	-	distance between port plane and the first open end of the waveguide

Two-Port Rectangular Waveguide Wizard

ICON:

MENU: Tools → Transmission Line Wizards → Two-Port Rectangular Waveguide

MODULE(S): EM.Tempo

FUNCTION: Creates the parameterized geometry of a two-port rectangular waveguide segment slightly above the cutoff at the center frequency of the project

NOTES, SPECIAL CASES OR EXCEPTIONS: The width of the waveguide is set slightly larger than half its cutoff wavelength for the dominant TE10 mode. The height is set equal to half its width. Both the width and height can be replaced by arbitrary numeric values.

PYTHON COMMAND(S): emag_rect_waveguide_2port(wg_len,feed_len,port_offset)

WAVEGUIDE WIZARD PARAMETERS

Parameter Name	Value Type	Units	Default Value	Notes
wg_len	real numeric	meters	-	length of the middle waveguide segment
feed_len	real numeric	meters	-	length of the feed waveguide segments
port_offset	real numeric	meters	-	distance between port planes and the open ends of the waveguide

Coaxial Connector Wizard

ICON:

MENU: Tools → Component Wizards → Coaxial Connector

MODULE(S): EM.Tempo

FUNCTION: Creates the parameterized geometry of a coaxial connector of a specified characteristic impedance in the project workspace

NOTES, SPECIAL CASES OR EXCEPTIONS: The radius of the outer conductor is determined based on the specified characteristic impedance. It may be replaced by a numeric value instead.

PYTHON COMMAND(S): emag_sma_connector(er,z0,inner_rad,flange_size,feed_len,ext_len)

COAXIAL CONNECTOR WIZARD PARAMETERS

Parameter Name	Value Type	Units	Default Value	Notes
er	real numeric	-	2.2	relative permittivity of the dielectric core
z0	real numeric	Ohms	50	characteristic impedance
inner_rad	real numeric	meters	0.001	radius of inner conductor
flange_size	real numeric	meters	0.01	lateral size of the flange
feed_len	real numeric	meters	0.03	length of the coaxial line segment
ext_len	real numeric	meters	0.0025	length of the inner conductor extension beyond the flange

Air Bridge Wizard

ICON:

MENU: Tools → Component Wizards → Air Bridge

MODULE(S): EM.Tempo, EM.Picasso

FUNCTION: Creates the parameterized geometry of an air bridge in the project workspace typically used to equalize the grounds of a CPW line

NOTES, SPECIAL CASES OR EXCEPTIONS: In EM.Tempo, this wizard creates a free-standing air bridge only. In EM.Picasso, it also creates and sets the substrate parameters.

PYTHON COMMAND(S):

emag_air_bridge_tempo(bridge_len,post_height,post_rad)

emag_air_bridge_picasso(h,er,bridge_len,post_height,post_rad)

AIR BRIDGE WIZARD PARAMETERS

Parameter Name	Value Type	Units	Default Value	Notes
h	real numeric	meters	0.0015	substrate height (thickness) (only in EM.Picasso)
er	real numeric	-	2.2	substrate relative permittivity (only in EM.Picasso)
bridge_len	real numeric	meters	0.01 (EM.Tempo) or 0.015 (EM.Picasso)	length of the bridge
post_height	real numeric	meters	0.004 (EM.Tempo) or 0.002 (EM.Picasso)	height of the two posts
post_rad	real numeric	meters	0.001	radius of the two posts

Solenoid Wizard

ICON:

MENU: Tools → Component Wizards → Solenoid

MODULE(S): CubeCAD, EM.Tempo, EM.Ferma, EM.Libera

FUNCTION: Creates the parameterized geometry of a solenoid with a generalized super-quadratic cross section in the project workspace

NOTES, SPECIAL CASES OR EXCEPTIONS: In EM.Ferma, this wizard turns the solenoid into a wire current source.

PYTHON COMMAND(S):

emag_solenoid(major_rad,minor_rad,height,turns,order,step)

emag_solenoid_ferma(major_rad,minor_rad,height,turns,order,step,current,wire_rad)

SOLENOID WIZARD PARAMETERS

Parameter Name	Value Type	Units	Default Value	Notes
major_rad	real numeric	project units	2	major radius of the super-quadratic cross section
minor_rad	real numeric	project units	2	minor radius of the super-quadratic cross section
height	real numeric	project units	10	total height of the solenoid
turns	integer numeric	-	10	total number of turns
order	integer numeric	-	2	order of the super-quadratic curve, N = 2 produces an ellipse
step	real numeric	-	0.005	increment in the interval [0, 2*pi] - determines the resolution of the curve
current	real numeric	Amp	1	total current flowing through the solenoid (only in EM.Ferma)
wire_rad	real numeric	project units	0.0005	radius of the solenoid wire (only in EM.Ferma)

Coil Wizard

ICON:

MENU: Tools → Component Wizards → Toroidal Coil

MODULE(S): CubeCAD, EM.Tempo, EM.Ferma, EM.Libera

FUNCTION: Creates the parameterized geometry of a toroidal helix coil with a generalized super-quadratic cross section in the project workspace

NOTES, SPECIAL CASES OR EXCEPTIONS: In EM.Ferma, this wizard turns the toroidal coil into a wire current source.

PYTHON COMMAND(S):

emag_coil(major_rad,minor_rad_h,minor_rad_v,turns,order,step)

emag_coil_ferma(major_rad,minor_rad_h,minor_rad_v,turns,order,step,current,wire_rad)

COIL WIZARD PARAMETERS

Parameter Name	Value Type	Units	Default Value	Notes
major_rad	real numeric	project units	10	radius of the circular axis
minor_rad_h	real numeric	project units	2	horizontal radius of the super-quadratic cross section
minor_rad_v	real numeric	project units	2	vertical radius of the super-quadratic cross section
turns	integer numeric	-	50	total number of turns
order	integer numeric	-	2	order of the super-quadratic curve, N = 2 produces an ellipse
step	real numeric	-	0.005	increment in the interval [0, 2*pi] - determines the resolution of the curve
current	real numeric	Amp	1	total current flowing through the coil (only in EM.Ferma)
wire_rad	real numeric	project units	0.0005	radius of the coil wire (only in EM.Ferma)

Foil Wizard

ICON:

MENU: Tools → Component Wizards → Conformal Coil

MODULE(S): CubeCAD, EM.Tempo, EM.Illumina, EM.Ferma, EM.Libera

FUNCTION: Creates the parameterized geometry of a cylindrical foil section in the project workspace

NOTES, SPECIAL CASES OR EXCEPTIONS: In EM.Tempo, this wizard creates a conformal metallic patch on a cylindrical dielectric coating around a cylindrical metal core. In all other modules, it creates a free-standing sectoral cylindrical foil.

PYTHON COMMAND(S):

emag_foil(foil_rad,foil_height,alpha)

emag_foil_tempo(er,core_rad,foil_rad,core_height,foil_height,foil_offset,alpha)

FOIL WIZARD PARAMETERS

Parameter Name	Value Type	Units	Default Value	Notes
er	real numeric	-	2.2	relative permittivity of the dielectric coating (only in EM.Tempo)
core_rad	real numeric	project units	20	radius of the metal core (only in EM.Tempo)
foil_rad	real numeric	project units	25 (in EM.Tempo) or 100 (all others)	radius of the foil section
core_height	real numeric	project units	50	height of the metal core (only in EM.Tempo)
foil_height	real numeric	project units	25 (in EM.Tempo) or 100 (in all others)	height of the foil section
foil_offset	real numeric	project units	10	offset of the foil section with respect to the base of metal core (only in EM.Tempo)
alpha	real numeric	degrees	90	sectoral angle

Parabolic Reflector Wizard

ICON:

MENU: Tools → Component Wizards → Parabolic Reflector

MODULE(S): CubeCAD, EM.Tempo, EM.Illumina, EM.Ferma, EM.Libera

FUNCTION: Creates the parameterized geometry of a parabolic reflector in the project workspace

NOTES, SPECIAL CASES OR EXCEPTIONS: The aperture diameter of the reflector is determined based on the focal and axial lengths of the primitive parabola.

PYTHON COMMAND(S): emag_parabolic_reflector(focal_len,axial_len)

PARABOLIC REFLECTOR WIZARD PARAMETERS

Parameter Name	Value Type	Units	Default Value	Notes
focal_len	real numeric	project units	50	focal length of the primitive parabola
axial_len	real numeric	project units	70	axial length of the primitive parabola

Trihedral Reflector Wizard

ICON:

MENU: Tools → Component Wizards → Trihedral Reflector

MODULE(S): CubeCAD, EM.Tempo, EM.Illumina, EM.Ferma, EM.Libera

FUNCTION: Creates the parameterized geometry of a Trihedral corner reflector in the project workspace

NOTES, SPECIAL CASES OR EXCEPTIONS: The aperture diameter of the reflector is determined based on the focal and axial lengths of the primitive parabola.

PYTHON COMMAND(S): emag_trihedral_reflector(side)

TRIHEDRAL REFLECTOR WIZARD PARAMETERS

Parameter Name	Value Type	Units	Default Value	Notes
side	real numeric	project units	100	square wall dimensions

Particle Cloud Wizard

ICON:

MENU: Tools → Component Wizards → Particle Cloud

MODULE(S): CubeCAD, EM.Tempo, EM.Illumina, EM.Ferma, EM.Libera

FUNCTION: Creates the parameterized geometry of a random cloud of regular polygon particles contained in an ellipsoid region

NOTES, SPECIAL CASES OR EXCEPTIONS: The aperture diameter of the reflector is determined based on the focal and axial lengths of the primitive parabola.

PYTHON COMMAND(S):

emag_particle_cloud(n_sides,side_length,cont_radius_x,cont_radius_y,cont_radius_z,n_elements)

emag_particle_cloud_cad(n_sides,side_length,cont_radius_x,cont_radius_y,cont_radius_z,n_elements)

PARTICLE CLOUD WIZARD PARAMETERS

Parameter Name	Value Type	Units	Default Value	Notes
n_sides	integer numeric	-	4	number of sides of the regular polygon particle
side_length	real numeric	project units	2	side length of the regular polygon particle
cont_radius_x	real numeric	project units	200	radius of the ellipsoid container along X
cont_radius_y	real numeric	project units	200	radius of the ellipsoid container along Y
cont_radius_z	real numeric	project units	100	radius of the ellipsoid container along Z
n_elements	integer numeric	-	100	total number of particles

Sierpinski Wizard

ICON:

MENU: Tools → Component Wizards → Sierpinski Strip

MODULE(S): CubeCAD, EM.Tempo, EM.Illumina, EM.Ferma, EM.Picasso, EM.Libera

FUNCTION: Creates the geometry of a Sierpinski triangle fractal in the project workspace

NOTES, SPECIAL CASES OR EXCEPTIONS: A dialog asks you to enter values for the key size and number of fractal levels. The wizard creates the Sierpinski triangle as a large set of smaller triangles, which cannot be modified using variables afterwards. You may want to group the set of all the triangles as a single composite object.

PYTHON COMMAND(S): emag_sierpinski(key_size,levels)

SIERPINSKI WIZARD PARAMETERS

Parameter Name	Value Type	Units	Default Value	Notes
key_size	real numeric	project units	100	side length of the largest (outermost) triangle
levels	integer numeric	-	3	number of fractal levels

Dipole Antenna Wizard

ICON:

MENU: Tools → Antenna Wizards → Wire Dipole Antenna

MODULE(S): EM.Tempo, EM.Libera

FUNCTION: Creates the parameterized geometry of a dipole antenna in the project workspace

NOTES, SPECIAL CASES OR EXCEPTIONS: In EM.Tempo, the dipole consists of two thin PEC cylinders fed by a lumped source on a short joining line. In EM.Libera, the dipole is a thin wire.

PYTHON COMMAND(S):

emag_dipole_tempo(len_lambda,wire_rad_lambda)

emag_dipole_libera(len_lambda,wire_rad_lambda)

DIPOLE WIZARD PARAMETERS

Parameter Name	Value Type	Units	Default Value	Notes
len_lambda	real numeric	-	0.5 (in EM.Libera) or 0.47 (in EM.Tempo)	length of dipole normalized to free-space wavelength
wire_rad_lambda	real numeric	-	0.002	wire radius normalized to free-space wavelength

Dipole Array Wizard

ICON:

MENU: Tools → Antenna Wizards → Wire Dipole Array

MODULE(S): EM.Libera

FUNCTION: Creates the parameterized geometry of a dipole antenna array in the project workspace

NOTES, SPECIAL CASES OR EXCEPTIONS: The dipole elements are all thin wires.

PYTHON COMMAND(S): emag_dipole_array(len_lambda,spacing_lambda,nx,ny,wire_rad_lambda)

DIPOLE ARRAY WIZARD PARAMETERS

Parameter Name	Value Type	Units	Default Value	Notes
len_lambda	real numeric	-	0.5	length of dipole normalized to free-space wavelength
spacing_lambda	real numeric	-	0.5	element spacing normalized to free-space wavelength
nx	integer numeric	-	5	number of elements along X
ny	integer numeric	-	1	number of elements along Y
wire_rad_lambda	real numeric	-	0.002	wire radius normalized to free-space wavelength

Yagi-Uda Array Wizard

ICON:

MENU: Tools → Antenna Wizards → Yagi-Uda Dipole Array

MODULE(S): EM.Libera

FUNCTION: Creates the parameterized geometry of a Yagi-Uda wire dipole array in the project workspace

NOTES, SPECIAL CASES OR EXCEPTIONS: The dipole elements are all thin wires.

PYTHON COMMAND(S): emag_yagi(excite_len_lambda,reflect_len_lambda,reflect_spacing_lambda,direct_len_lambda,direct_spacing_lambda,n_direct,wire_rad_lambda)

YAGI WIZARD PARAMETERS

Parameter Name	Value Type	Units	Default Value	Notes
excite_len_lambda	real numeric	-	0.47	length of exciter dipole normalized to free-space wavelength
reflect_len_lambda	real numeric	-	0.5	length of reflector dipole normalized to free-space wavelength
reflect_spacingn_lambda	real numeric	-	0.25	spacing between reflector and exciter dipoles normalized to free-space wavelength
direct_len_lambda	real numeric	-	0.406	length of director dipoles normalized to free-space wavelength
direct_spacing_lambda	real numeric	-	0.34	spacing between director dipoles normalized to free-space wavelength
n_direct	integer numeric	-	5	number of director dipole elements along X
wire_rad_lambda	real numeric	-	0.003	wire radius normalized to free-space wavelength

Printed Dipole Wizard

ICON:

MENU: Tools → Antenna Wizards → Printed Dipole Antenna

MODULE(S): EM.Tempo, EM.Picasso

FUNCTION: Creates the parameterized geometry of a printed dipole antenna on a dielectric substrate in the project workspace

NOTES, SPECIAL CASES OR EXCEPTIONS: In EM.Tempo, the printed dipole consists of two PEC strips fed by a lumped source on a short joining line. In EM.Picasso, the printed dipole is a single PEC strip with a gap source on it.

PYTHON COMMAND(S):

emag_printed_dipole_tempo(h,er,wid,sub_size,has_ground)

emag_printed_dipole_picasso(h,er,wid,has_ground)

PRINTED DIPOLE WIZARD PARAMETERS

Parameter Name	Value Type	Units	Default Value	Notes
h	real numeric	meter	0.0015	substrate thickness (height)
er	real numeric	-	2.2	substrate relative permittivity
wid	real numeric	meter	0.005	strip width
sub_size	real numeric	meter	0.15	substrate dimensions along X and Y (only in EM.Tempo)
has_ground	Boolean	-	True	Places a PEC ground plane of the same size as the dielectric substrate

Probe-Fed Patch Wizard

ICON: File:Patch icon.png

MENU: Tools → Antenna Wizards → Probe-Fed Patch Antenna

MODULE(S): EM.Tempo, EM.Picasso

FUNCTION: Creates the parameterized geometry of a probe-fed rectangular patch antenna in the project workspace

NOTES, SPECIAL CASES OR EXCEPTIONS: In EM.Tempo, the patch antenna is fed by a lumped source on a short vertical PEC line. In EM.Picasso, the patch antenna is fed by a probe source on a short vertical PEC via.

PYTHON COMMAND(S):

emag_patch_tempo(h,er,feed_ratio,sub_size)

emag_patch_picasso(h,er,feed_ratio,feed_rad)

PATCH WIZARD PARAMETERS

Parameter Name	Value Type	Units	Default Value	Notes
h	real numeric	meter	0.0015	substrate thickness (height)
er	real numeric	-	2.2	substrate relative permittivity
feed_ratio	real numeric	-	0.4	ratio of location of probe to half patch length xf/(a/2)
feed_rad	real numeric	meter	0.005	radius of probe via
sub_size	real numeric	meter	0.15	substrate dimensions along X and Y (only in EM.Tempo)

Probe-Fed Patch Array Wizard

ICON:

MENU: Tools → Antenna Wizards → Probe-Fed Patch Array

MODULE(S): EM.Tempo, EM.Picasso

FUNCTION: Creates the parameterized geometry of a probe-fed rectangular patch antenna array in the project workspace

NOTES, SPECIAL CASES OR EXCEPTIONS: In EM.Tempo, the patch antenna is fed by a lumped source on a short vertical PEC line. In EM.Picasso, the patch antenna is fed by a probe source on a short vertical PEC via.

PYTHON COMMAND(S):

emag_patch_array_tempo(h,er,feed_x,nx,ny,spacing_lambda)

emag_patch_array_picasso(h,er,feed_rad,feed_ratio,nx,ny,spacing_lambda)

PATCH WIZARD PARAMETERS

Parameter Name	Value Type	Units	Default Value	Notes
h	real numeric	meter	0.0015	substrate thickness (height)
er	real numeric	-	2.2	substrate relative permittivity
feed_ratio	real numeric	-	0.005	ratio of location of probe to half patch length xf/(a/2)
sub_size	real numeric	meter	0.15	substrate dimensions along X and Y (only in EM.Tempo)