<center>
[[Image:neoscanfig_3_12.png|thumb|center|500px|<i><b>Figure 3.12</b>: Lock-in Amplifier Settings in Optimization Settings Page.</i>]]
</center>>
</li>
<li>
</li>
<li>
ï¾ Remote: 50 ï Ω external source, Figure 3.13(f).
</li>
</ul>
</ol>
<center><i><b>Table 3.1</b>: Default values for the main parameters used in the optimization process.</i></center>
<div class="noprint" style="float:left;margin-right:10px">
{| border="1" class="wikitable"
|+ <i><b>Table 3.1</b>: Default values for the main parameters used in the optimization process.</i>
|-
! <b>Parameter</b>
| <b>Description</b>
| <b>Default Value</b>
|-
! Lock-in Amplifier Visa
| Lock-in Amplifier GPIB address
| GPIB0::8::INSTR
|-
! Sensitivity
| Lock-in Amplifier Sensitivity
| 100 uV / -67 dBm
|-
! Time Constant
| Lock-in Amplifier Time Constant
| 10 ms
|-
! No. Averaging Points
| Number of points used to find the peak value
| 5
|-
! Variation Limit
| Maximum variation from the nominal value
| 1.00 dBm
|-
! PC Voltage
| Maximum voltage applied to the polarization controllers during the optimization process.
| 3.0 V
|-
! Voltage Steps
| Voltage steps applied to the polarization controllers during the optimization process
| 0.01 V
|-
! Wait Time
| Interval delay time
| 1000 ms
|}
</div>