===Setting Up a Discrete Value Set===
[[File:b2MAN_Fig222.png|thumb|440px|RF.Spice's Select Model dialog.]]
In many cases, a certain parameter may take certain discrete values. Examples of these are the commercial resistor or capacitor part values. In such cases, rather than running a uniform parameter sweep, you may want to set your sweep variable to take a set of discrete values. To do so, after you select your sweep parameter, select the "Values List" radio button in the "Parameter Setup" section of the Sweep Settings Dialog. An edit box appears under the radio button, where you can enter the set of values for your sweep variable. You can separate the values by commas. You can also load the values from a text file using the button labeled "Load From File". The data file can be a very simple file just containing the numeric values separated by spaces or commas or one value per line.
<table>
<tr>
<td>
[[File:b2MAN_Fig222.png|thumb|440px|RF.Spice's Select Model dialog.]]
</td>
</tr>
</table>
<table>
<tr>
<td>