The model statement specifies the name of your RF device model, in this case, MyNewRFBJT. The symbol statement determines the device type and schematic symbol. The symbol_name can only be one of the choice given in the table below. The frequency units can be hz, khz, mhz or ghz. "s" implies the s-parameters. If the complex_data_format is left blank, the S-parameters are interpreted to have Mag/Phase format, with the magnitude on a linear scale and phase expressed in degrees. The other options for complex_data_format are "ma" for magnitude expressed in dB, or "ri" for Real/Imag format. The last part specifies the reference impedance value, which must come after letter "r". In the above example, the reference impedance is 50 Ohms.
[[Image:Info_icon.png|40px]] Click here to see a '''[[An_Overview_of_RF_Circuit_Simulation#List_of_Standard_Imported_RF_Devices | List of Standard Imported RF Devices]]'''.
== Using Device Manager for Importing S-Parameter Data ==