[[EM.Cube]] provides a number of wizards for quick construction of patch antennas with different feed mechanisms: a probe feed, an edge-connected microstrip feed with or without a recess, and a slot-coupled open-ended microstrip feed. For this project, we consider a probe-fed square patch antenna with the following specifications:
<table>
<tr>
<td>
[[Image:Patch wizard raw.png|thumb|left|480px| The geometry setup for a rectangular microstrip patch antenna on a finite-sized substrate in EM.Tempo.]]
</td>
</tr>
</table>
{| class="wikitable"
! scope="col"| Parameter Name
! scope="col"| Value
! scope="col"| Electrical Dimension
|-
| Substrate Height (h)
| 1.5mm
| 8λ<sub>0</sub>
|-
| Substrate Relative Permittivity (ε<sub>r</sub>)
| 2.2
| 2λ<sub>0</sub>
|-
| Patch Length
| 480mm| 16λ<sub>0</sub> 88.20mm
|-
| Feed Offset (from Center)
| 035.5| N/A 28mm
|-
| Subtended Angle (θ<sub>0</sub>)Substrate Size| 53.13°| N/A |-| Estimated Aperture Efficiency (ε<sub>ap</sub>)| 0.25| N/A |-| Estimated Directivity (D<sub>0</sub>)| 28dB| N/A 150mm
|}
<table>
<tr>
<td>
[[Image:Patch wizard raw.png|thumb|left|480px| The geometry setup for a rectangular microstrip patch antenna on a finite-sized substrate in EM.Tempo.]]
</td>
</tr>
</table>