<br clear="all" />
== Results Simulation == After the sources, observables, and mesh are set up, the simulation can be run. For this example, we use the default engine settings. [[EM.Cube]]
The complete simulation, including meshing, time-stepping, and farfield calculation took 5 hours, 50 minutes. The average performance of the timeloop was 330 MCells/s. The farfield computation requires a significant portion of the total simulation time. The farfield computation could have been reduced with larger theta and phi increments, but, typically, for electrically large structures, resolutions of 1 degree or less are required.
[[Image:Large struct article ScreenCapture1.png|thumb|left|500px|Figure 1: Geometry of the periodic unit cell of the dispersive water slab in EM.Tempo.]]
270 million
[[Image:Large struct article RCS YZ.png|thumb|left|500px200px|Figure 1: Geometry YZ cut of the periodic unit cell of the dispersive water slab in EM.Tempo.RCS]]