</table>
The DC bias circuit has been designed to generate a collector current of IC = 10mA with a collector-emitter voltage of VCE = 10V. For this reason, you will use the S-parameter RF model BFG193v10v10mA in the next part. Run a DC Bias Test of your BJT amplifier to find its DC operating point [[parameters]].
<table>
V<sub>CE</sub> = V<sub>QC</sub> - V<sub>QE</sub> = 16.933 -6.911 = 10.022V
which validate the DC bias design goals. You can also see all the DC voltages and currents by running a live simulation of the circuit and enabling circuit [[animation]] on the [[Schematic Editor]].
== Stability Analysis of the BJT Transistor & RF Design Strategy ==