To view 3D plots, press the “3D Plots” tab in Near Field Maps page (Figure 5.9).
<ul>
<li>
<p>
3D Amplitude graphs can be plotted either in dBV/m or V/m using the key labeled “Amplitude Unit?”
</p>
</li>
<li>
<p>
The “Phase Shift” knob adds an angular shift (in degree) to the phase distribution.
</p></li><li><p>
Users can choose the plot style using “Plot Style” dropdown window (Figure 5.10). It includes:
</p>
<ul>
<li>
cwLine
</li>
<li>
cwPoint
</li>
<li>
cwLinePoint
</li>
<li>
cwHiddenLine
</li>
<li>
cwSurface
</li>
<li>
cwSurfaceLine
</li>
<li>
cwSurfaceNormal
</li>
<li>
cwContourLine
</li>
<li>
cwSurfaceContour
</li>
</ul>
The default format is “cwSurface.”
</p></li><li><p>
To adjust the graph degree of transparency use “Transparency” knob or Transparency Entry Box as shown in Figure 5.11.
</p>
</li>
</ol>
<center>
[[Image:neoscanfig_5_9.png|thumb|center|600px|<i><b>Figure 5.9</b>: 3D plots in NeoScan Plot Utility Page (with cwSurface plot style).</i>]]
<br>
[[Image:neoscanfig_5_10.png|thumb|center|600px|<i><b>Figure 5.10</b>: 3D plots in Fig. 5.9 with cwPoint plot style.</i>]]
<br>
[[Image:neoscanfig_5_11.png|thumb|center|600px|<i><b>Figure 5.11</b>: Effect of transparency level on 3D plots: 0% transparency level (left) and 50% transparency level (right).</i>]]
</center>
The “Stop” button stops the application. To close (kill) the [[NeoScan]] window click on exit button [[Image:icon_Exit.png]] on the top far right in the LabView user interface. To re-start running the program press the start button [[Image:icon_Start.png]] located on the top left in the LabView window, see Figure 5.1.
5.1.5 ==== Far Field Patterns Page The far field pattern measurement and utility are discussed in details in section 6.====
The far field pattern measurement and utility are discussed in details in section 6.