<tr>
<td>
[[Image:cad_manual-52_tn_new.png|thumb|left|720px|The process of extruding Extruding an edgeobject.]]
</td>
</tr>
# Notice the Extrusion Properties Box that appears at the bottom of the Navigation Tree. You can customize the rotation angle of the plane created by the edge extrusion operation from within this box. You can also press the ARROW keys on your keyboard to quickly rotate the extruded planeâs vector 90º (D).
<table><tr><td> [[FileImage:cad_manual-53_tn_new.png|Extrude Example 1thumb|left|720px|The process of extruding an edge.]]</td></tr></table>
Example 2: Changing The Draft Angle Of An Extrusion
# Once an extrusion has been created, you can change the draft angle from within the extrusion dialog box. The draft angle allows you to taper inward or flare outward the extrusion walls.
<table><tr><td> [[FileImage:cad_manual-54_tn_new.png|thumb|left|720px|The process of extruding a face.]]</td></tr></table>
As with all property boxes, you can click on the blue preview button to preview your settings. Clicking on the green check mark will commit the current settings, while clicking on the red âxâ will dismiss the dialog (D).