# Click the '''Mesh Settings''' [[File:mesh_settings.png]] button of the Simulate Toolbar.
# The Mesh Settings dialog of the currently c=active [[EM.Cube]] module opens up.
# From the '''Host''' drop-down list, select a line object. Note that only line parallel to one of the three principal axes are listed.
# By default, the lumped source is placed at the midpoint of the host line object. You can modify the '''Offset''' parameter, which is measured from the start point of the line and is always positive.
<tr>
<td>
[[Image:MESH MAN12.png|thumb|left|480px600px|Locking the mesh density in the property dialog of a material group.]]
</td>
</tr>