Changes

==An Overview of RF.Spice A/D Parts & Devices==

Your [[RF.Spice A/D]] circuit is made up of one or more parts that are connected to one another using wires. Resistors, capacitors, transistors, voltage and current sources, etc. are all [[RF.Spice A/D]] parts. A part consists of a simulation model and a symbol. The simulation model determines the circuit behavior of the part. Simulation models usually have the standard SPICE "Netlist" format. The part's symbol, on the other hand, is used to include it into your circuit's schematic. The part's symbol may have one or more pins. These pins are mapped onto the terminals or nodes of the part's simulation model. A part's pins are also used to connect it to the other parts in your schematic.