|All versions|{{download|http://www.emagtech.com/downloads/ProjectRepo/RFLesson8.zip RF Lesson 8}} }}
=== What You Will Learn ===
In this tutorial you will build an RF amplifier using a high frequency bipolar junction transistor (BJT) with lumped elements. First, you will examine the S-parameter model of the transistor and analyze its DC bias circuit. Then, you will calculate the port characteristics of the amplifier and verify its matching networks. Finally, you will run an AC frequency sweep analysis of the amplifier to characterize its voltage and gain performance.
</table>
Run a Network Analysis Test of the true amplifier circuit independent of the source and load with the [[parameters]] specified below:
{| border="0"
</table>
Run an AC frequency sweep with the [[parameters]] specified below:
{| border="0"
</table>
<p> </p>
[[Image:Back_icon.png|40px]] '''[[RF.Spice_A/D#RF.Spice_A.2FD_Tutorial 2FD_Tutorials | Back to RF.Spice A/D Tutorial Gateway]]'''