Changes
# The default option is a circular arc fillet with a radius of 10 project units. You may choose another fillet type: Linear (Chamfer), G1, G2 or G3 Blend.
# Make sure to click the OK button of the Fillet Dialog to finalize the operation.
SPECIAL CASES OR EXCEPTIONS:
PYTHON COMMAND: fillet(object,radius)
<table><tr><td>
[[File:Fillet_tn.png|thumb|left|720px|The fillet tool.]]
</td>
</tr>
</table>
==Group Tool==
This example illustrates the face of a cylinder revolved about the axis of a pyramid"s edge.
[[File:cad_manual-59_tn.png|600px|revolve sample 3]]
Example 4: Partial Revolutions
<table>
<tr>
<td> [[Image:strip-tool_tn_new.png|thumb|600px720px|Using strip-sweep tool to turn a spiral curve into a surface object.]] </td>
</tr>
</table>
<table>
<tr>
<td> [[Image:consttranslate1_tn_new.png|thumb|500px480px|Translating a box from a face snap point while holding the Alt Key down.]] </td>
</tr>
<tr>
<td> [[Image:consttranslate2_tn_new.png|thumb|500px480px|Translating a box from an edge snap point while holding the shift Key down.]] </td>
</tr>
<tr>
<td> [[Image:consttranslate3_tn_new.png|thumb|500px480px|Translating a box from a vertex snap point while holding the shift Key down.]] </td>
</tr>
</table>