Changes

The template created a blue point object called "Point_TX1" under the base location point radiators group "Base_TX1" as well as an orange point array called "Array_RX1" under the base location point radiators group "Base_RX1". A default vertically polarized half-wave dipole transmitter called "TX1" and an isotropic receiver grid called "RX1" were also created associated with "Base_TX1" and "Base_RX1", respectively. All of these were done automatically by the New Project dialog. Also note that a large number of receivers fall inside the two buildings. If a transmitter falls inside an impenetrable building, its rays will not reach any receivers outside the building. Similarly, if a receiver is located inside an impenetrable building, it will not receive any rays, and therefore, it will have a zero total received power.