Changes

A separate window pops up displaying messages from the simulation engine. Once the simulation has been completed, close the message window and return to the project workspace. The navigation tree is now populated with simulation results under the '''Point Receivers''' node. Go to the “Receivers” section of the navigation tree and click on the '''Rcvd Power''' item under the “ReceiverSet_1” node. This will display the received power coverage map of your receivers in the form of small colored square confetti slightly above the receivers. The color scale on the right shows the maximum and minimum power values of -29.0dBm and -37.9dBm corresponding to the closest and farthest receivers with respect to the transmitter. The legend box also shows the mean and standard deviation of the received powers, which are -34.13dBm and 2.816dBm, respectively. When the communication link between the transmitter and the receiver is closed the green LED indicates Link ON, otherwise, the red LED appears showing Link OFF.