Changes

</table>

To understand the operation of the flip-flop circuit, you will use the "Live Digital Timing Diagram" feature of [[RF.Spice A/D]]. As you earned in the previous tutorial lesson, set the step time to 20ns. Set the input initially to In1 = 0. Then, to activate the timing diagram, click the "'''Show/Hide Live Digital Timing Diagrams'''" [[File:b2Timing_Tool.png]] button of the '''[[Toolbars#Schematic_Toolbar |Schematic Toolbar]]'''. Remember that nothing will happen until you start a [[Digital Simulation|digital simulation]]. Click the "'''Step'''" [[File:b2Step_Tool.png]] button of the '''[[Toolbars#Main_Toolbar |Main Toolbar]]''' or use the keyboard shortcut {{key|Ctrl+H}} to advance the simulation time one step at a time. Step the simulation time to 60ns and then change the input to In1 = 1. Keep stepping to 160ns and then change the input to In1 = 0 again. Continue stepping to 400ns and change the input to In1 = 1 once again and then proceed to 600ns. The table below summarizes the input entries:

|}

The timing diagram of your D flip-flop circuit is shown in the figure below. As you can see from the figure, the input first rises from 0 to 1 at t = 160ns. The flip-flop waits until the next rising edge of the clock signal at t = 200ns. The input's high state is transferred to the output Q with a propagation delay of 14ns. According to the property dialog of the D Flip-Flop device, the low-to-high propagation delay of the device is tPLH = 14ns, while its high-to-low propagation delay is tPHL = 1420ns. Therefore, Q rises from 0 to 1 at t = 214ns and stays high for the next several clock cycles. The input next falls from 1 to 0 at t = 260ns. The flip-flop waits until the next rising edge of the clock signal at t = 300ns. The input's low state is transferred to the output Q with a propagation delay of 20ns. Therefore, Q falls from 1 to 0 at t = 320ns and stays low for the next several clock cycles. The input rises again from 0 to 1 at t = 400ns and stay high for the rest of the simulation time. This time the flip-flop has to wait a full clock period until the next rising edge of the clock signal at t = 500ns. The input's high state is transferred to the output Q with a propagation delay of 14ns. Then, Q rises again from 0 to 1 at t = 514ns and stays high for the rest of the simulation time.