Changes

Jump to: navigation, search

Creating New Devices and Models

46 bytes added, 14:59, 10 November 2016
/* Setting & Matching Device Pins */
==Setting & Matching Device Pins==
[[File:b2MAN_Fig45.png|thumb|480px| "Connect Symbol Pins to Model Pins" Dialog.]]
When creating a new simulation model as will be discussed later, you can also instruct the Device Editor to create a default (simple and basic) symbol for a it. Normally, if you have already set the simulation model pin or terminal names, the symbol pins will automatically match the model pins. In many other cases, you may create the models and symbols separately and independently. In such cases, you need set and match the symbol pins with the corresponding model pins.
It is important to match up the pins correctly because the simulator will need this information to be correct to simulate the part correctly. Limit pin names to 10 characters or less. For spaces use underscore ( _ ). Dashes are not accepted. Click OK when all the pins have been matched up correctly.
 
<table>
<tr>
<td>
[[File:b2MAN_Fig45.png|thumb|left|720px| "Connect Symbol Pins to Model Pins" Dialog.]]
</td>
</tr>
</table>
==Creating a New Device from an Existing Simulation Model==
28,333
edits