[[Image:NEOWEB5.png|thumb|450px|Modulating the polarization state of an optical beam passing through an electro-optic crystal.]]
Â
Some of the key features of NeoScan field measurement systems include:
*Non-intrusive and non-contact RF measurement thanks to the small footprint and absence of any metal parts or interconnnects at the signal pickup area
*Broad measurement bandwidth (>20MHz - 20GHz) using the same optical probes*High spatial resolution driven by the laser beam spot size (finer than 100 μm sq)*Simultaneous amplitude Amplitude and phase measurementPhase Measurement*Vectorial field measurement Component Measurement with very high cross-polarization suppressionCross Polarization Suppression Better than 25dB
*Very wide dynamic range (>70dB) from very low field intensities under 1V/m to extremely high field intensities above 2MV/m
*Typical Probe Tip Size: 1mm<sup>3</sup>
*High spatial resolution driven by the laser beam spot size (finer than 10 μm) with scan steps as small as 100μm
DUT Proximity: As close as 150μm
Standoff Distance (of Mainframe Box): Up to 50m
== Applications of the NeoScan System ==