[[Image:Info_icon.png|40px]] Click here to learn more about EM.Libera's '''[[Mesh_Generation_Schemes_in_EM.Cube#The_Linear_Wireframe_Mesh_Generator | Linear Wireframe Mesh Generator ]]'''.
Â
=== Creating & Viewing the Mesh ===
Â
The mesh generation process in EM.Libera involves three steps:
Â
# Setting the mesh properties.
# Generating the mesh.
# Verifying the mesh.
Â
The objects of your physical structure are meshed based on a specified mesh density expressed in cells/λ<sub>0</sub>. The default mesh density is 10 cells/λ<sub>0</sub>. To view the PO mesh, click on the [[File:mesh_tool_tn.png]] button of the '''Simulate Toolbar''' or select '''Menu > Simulate > Discretization > Show Mesh''' or use the keyboard shortcut '''Ctrl+M'''. When the PO mesh is displayed in the project workspace, [[EM.Cube]]'s mesh view mode is enabled. In this mode, you can perform view operations like rotate view, pan, zoom, etc. However, you cannot select or move or edit objects. While the mesh view is enabled, the '''Show Mesh''' [[File:mesh_tool.png]] button remains depressed. To get back to the normal view or select mode, click this button one more time, or deselect '''Menu > Simulate > Discretization > Show Mesh''' to remove its check mark or simply click the '''Esc Key''' of the keyboard.
Â
"Show Mesh" generates a new mesh and displays it if there is none in the memory, or it simply displays an existing mesh in the memory. This is a useful feature because generating a PO mesh may take a long time depending on the complexity and size of objects. If you change the structure or alter the mesh settings, a new mesh is always generated. You can ignore the mesh in the memory and force [[EM.Cube]] to generate a mesh from the ground up by selecting '''Menu > Simulate > Discretization > Regenerate Mesh''' or by right clicking on the '''3-D Mesh''' item of the Navigation Tree and selecting '''Regenerate''' from the contextual menu.
Â
To set the PO mesh properties, click on the [[File:mesh_settings.png]] button of the '''Simulate Toolbar''' or select '''Menu > Simulate > Discretization > Mesh Settings... '''or right click on the '''3-D Mesh''' item in the '''Discretization''' section of the Navigation Tree and select '''Mesh Settings...''' from the contextual menu, or use the keyboard shortcut '''Ctrl+G'''. You can change the value of '''Mesh Density''' to generate a triangular mesh with a higher or lower resolutions. Some additional mesh [[parameters]] can be access by clicking the {{key|Tessellation Options}} button of the dialog. In the Tessellation Options dialog, you can change '''Curvature Angle Tolerance''' expressed in degrees, which as a default value of 15°. This parameter can affect the shape of the mesh especially in the case of solid CAD objects. It determines the apex angle of the triangular cells of the primary tessellation mesh which is generated initially before cell regularization. Lower values of the angle tolerance result in a less smooth and more pointed mesh of curved surface like a sphere.
<table>
<tr>
<td> [[Image:PO2.png|thumb|450px|Two ellipsoids of different (PEC and dielectric) compositions.]] </td>
<td> [[Image:PO3.png|thumb|450px|Trinagular surface mesh of the two ellipsoids.]] </td>
</tr>
</table>
=== Mesh of Connected Objects ===