Changes

However, you can prescribe certain amplitude and/or phase distribution over the array of gap or probe sources. By default, all the gap or probe sources have identical amplitudes of 1V (or 1A for the slot case) and zero phase. The available amplitude distributions to choose from include '''Uniform''', '''Binomial''' and '''Chebyshev''' and '''Date File'''. In the Chebyshev case, you need to set a value for minimum side lobe level ('''SLL''') in dB. You can also define '''Phase Progression''' in degrees along all three principal axes. You can view the amplitude and phase of individual sources by right clicking on the top '''Sources''' item in the Navigation Tree and selecting '''Show Source Label''' from the contextual menu.

Figure 1: Defining gap sources on an array of rectangle strip objects with a Chebyshev amplitude distribution.

In the data file option, the complex amplitude are directly read in from a data file using a real - imaginary format. When this option is selected, you can either improvise the complex array weights or import them from an existing file. In the former case click the '''New Data File''' button. This opens up the Windows Notepad with default formatted data file that has a list of all the array element indices with default 1+j0 amplitudes for all of them. You can replace the default complex values with new one and save the Notepad data file, which brings you back to the Gap Source dialog. To import the array weights, click the '''Open Data File''' button, which opens the standard Windows Open dialog. You can then select the right data file from the one of your folders. It is important to note that the data file must have the correct format to be read by EM.Cube. For this reason, it is recommended that you first create a new data file with the right format using Notepad as described earlier and then save it for later use.

Figure 2: Defining gap source array weights using a data file.