A separate window pops up displaying messages from the simulation engine. Once the simulation has been completed, close the message window and return to the project workspace. The navigation tree is now populated with simulation results under the '''Receivers''' node. Go to the “Receivers” section of the navigation tree and click on the '''Rcvd Power''' item under the “ReceiverSet_1” node. This will display the received power coverage map of your receivers in the form of small colored square confetti slightly above the receivers. The color scale on the right shows the maximum and minimum power values of -37.9dBm and -29.0dBm corresponding to the closest and farthest receivers with respect to the transmitter. The legend box also shows the mean and standard deviation of the received powers, which are -34.13dBm and 2.816dBm, respectively.
<table>
<tr>
<td> [[Image:Terrano_L1_Fig16b.png|thumb|left|600px|EM.Terrano's simulation output window.]] </td>
</tr>
</table>
<table>
== Examining the Individual Receivers ==
Open the property dialog of your receiver set and select the first receiver of the array called "ReceiverSet_1_1". Then, click the {{key|Show Ray Data}} button to open up the Ray Data Dialog. You will see a table that lists all the rays received by the selected receiver along with the properties of those rays including their delay in nsec, Theta and Phi angles of arrival and departure in degrees and the amplitude and phase of the Theta and Phi field components of individual rays in dBV/m and degrees, respectively, and the ray's total power in dBm. You will also see two boxes that report the <b>Total Received Power</b> in dBm and the <b>Total Received Field</b> in dBV/m. The computed total received field is reported as -10.28dBV/m. You can change the active receiver index using the drop-down list labeled '''Select Element''' and examine the simulation data for all the receivers in your scene. When the communication link between the transmitter and the receiver is closed the green LED indicates Link ON, otherwise, the red LED appears showing Link OFF.
<table>