</li>
<li>
<p>The fans in [[NeoScan]] optical mainframe are required to maintain proper operation. Do not block the vents in the frame box.</p>
</li>
<li>
<p>In order to avoid EMC/EMI effect, keep the [[NeoScan]] box as far away from the DUT as possible.</p>
</li>
<li>
<p>Follow standard electrostatic-discharge precaution, including grounding yourself prior to making cable connections to the system. A ground strap provides the most effective grounding and minimizes the likelihood of electrostatic damage.</p>
</li>
<li>
<p>Handle the probes and the PM fibers with extreme care. </p>
</li>
<li>
<p>Gently clean and attach the appropriate fiber connectors to the correct fiber port of the [[NeoScan]] system. </p>
</li>
<li>
<p>Do not excessively pull or bend the fiber.</p>
</li>
<br>
<li>
<p>The probe tip is extremely fragile. Do not strike the probe tip. Always keep the probes in a safe place. </p>
</li>
<li>
<p>Keep the cables and the fibers handy in safe positions, but out of the way and untangled.</p>
</li>
<li>
<p>Always use an SMA torque wrench when connecting the SMA connectors.</p>
</li>
<li>
<p>Do not over-torque the microwave SMA connectors.</p>
</li>
<li>
<p>Do not over-tighten the optical connectors.</p>
</li>
</ul>