Changes

Glossary of EM.Cube's Wizards

3,995 bytes added, 16:29, 4 August 2016
FUNCTION: Creates the parameterized geometry of a two-port microstrip line segment of a specified characteristic impedance on a conductor-backed single-layer dielectric substrate in the project workspace
NOTES, SPECIAL CASES OR EXCEPTIONS: In [[EM.Tempo]], the two ports are set placed at the two edges of the substrate. The width of the microstrip lines is determined based on the specified characteristic impedance. It may be replaced by a numeric value instead.
| -
| width of substrate (only in [[EM.Tempo]] & [[EM.Ferma]])
|-
! scope="row" | draw_substrate
| Boolean
| -
| True
| Adds substrate & ground plane
|}
 
== Two-Port Coplanar Waveguide (CPW) Wizard ==
 
ICON: [[File:cpw2p icon.png]]
 
MENU: '''Tools → Transmission Line Wizards → Two-Port Coplanar Waveguide'''
 
MODULE(S): [[EM.Tempo]], [[EM.Picasso]]
 
FUNCTION: Creates the parameterized geometry of a two-port coplanar waveguide segment on a single-layer dielectric substrate in the project workspace
 
NOTES, SPECIAL CASES OR EXCEPTIONS: In [[EM.Tempo]], the two ports are placed at the two edges of the substrate.
 
 
PYTHON COMMAND(S):
 
emag_cpw_2port_tempo(h,er,strip_wid,slot_wid,strip_len,sub_len,sub_wid,draw_substrate)
 
emag_cpw_2port_picasso(h,er,w,s,ls,lf)
 
 
TWO-PORT CPW WIZARD PARAMETERS
{| border="0"
|-
| valign="top"|
|-
{| class="wikitable"
|-
! scope="col"| Parameter Name
! scope="col"| Value Type
! scope="col"| Units
! scope="col"| Default Value
! scope="col"| Notes
|-
! scope="row" | h
| real numeric
| project units
| 0.0015
| substrate height (thickness)
|-
! scope="row" | er
| real numeric
| -
| 2.2
| substrate relative permittivity
|-
! scope="row" | strip_wid
| real numeric
| meters
| 0.002
| width of the center strip
|-
! scope="row" | slot_wid
| real numeric
| meters
| 0.002
| width of the slots
|-
! scope="row" | strip_len
| real numeric
| meters
| -
| length of the line segment
|-
! scope="row" | sub_len
| real numeric
| meters
| -
| length of substrate (only in [[EM.Tempo]])
|-
! scope="row" | sub_wid
| real numeric
| meters
| -
| width of substrate (only in [[EM.Tempo]])
|-
! scope="row" | draw_substrate
COAXIAL WIZARD PARAMETERS
{| border="0"
|-
| valign="top"|
|-
{| class="wikitable"
|-
! scope="col"| Parameter Name
! scope="col"| Value Type
! scope="col"| Units
! scope="col"| Default Value
! scope="col"| Notes
|-
! scope="row" | er
| real numeric
| -
| 2.2
| substrate relative permittivity
|-
! scope="row" | z0
| real numeric
| Ohms
| 50
| characteristic impedance
|-
! scope="row" | r_inner
| real numeric
| meters
| 0.001
| radius of inner conductor
|-
! scope="row" | len
| real numeric
| meters
| -
| length of the line segment (only in [[EM.Tempo]])
|}
 
== Two-Port Coaxial Wizard ==
 
ICON: [[File:coax2p icon.png]]
 
MENU: '''Tools → Transmission Line Wizards → Two-Port Coaxial Line'''
 
MODULE(S): [[EM.Tempo]]
 
FUNCTION: Creates the parameterized geometry of a two-port coaxial line segment of a specified characteristic impedance with a dielectric core in the project workspace
 
NOTES, SPECIAL CASES OR EXCEPTIONS: The radius of the outer conductor is determined based on the specified characteristic impedance. It may be replaced by a numeric value instead.
 
 
PYTHON COMMAND(S): emag_coax_2port_tempo(er,z0,r_inner,len)
 
 
TWO-PORT COAXIAL WIZARD PARAMETERS
{| border="0"
|-
PYTHON COMMAND(S):emag_rect_waveguide(wg_len,port_offset)
| -
| distance between port plane and the first open end of the waveguide
|}
 
== Two-Port Rectangular Waveguide Wizard ==
 
ICON: [[File:wg2p icon.png]]
 
MENU: '''Tools → Transmission Line Wizards → Two-Port Rectangular Waveguide'''
 
MODULE(S): [[EM.Tempo]]
 
FUNCTION: Creates the parameterized geometry of a two-port rectangular waveguide segment slightly above the cutoff at the center frequency of the project
 
NOTES, SPECIAL CASES OR EXCEPTIONS: The width of the waveguide is set slightly larger than half its cutoff wavelength for the dominant TE10 mode. The height is set equal to half its width. Both the width and height can be replaced by arbitrary numeric values.
 
 
PYTHON COMMAND(S): emag_rect_waveguide_2port(wg_len,feed_len,port_offset)
 
 
WAVEGUIDE WIZARD PARAMETERS
{| border="0"
|-
| valign="top"|
|-
{| class="wikitable"
|-
! scope="col"| Parameter Name
! scope="col"| Value Type
! scope="col"| Units
! scope="col"| Default Value
! scope="col"| Notes
|-
! scope="row" | wg_len
| real numeric
| meters
| -
| length of the middle waveguide segment
|-
! scope="row" | feed_len
| real numeric
| meters
| -
| length of the feed waveguide segments
|-
! scope="row" | port_offset
| real numeric
| meters
| -
| distance between port planes and the open ends of the waveguide
|}
Kazem Sabet
28,333
edits