Changes

====boxline({{ArgTypeString}} label, {{ArgTypeAny}} x0, {{ArgTypeAny}} y0, {{ArgTypeAny}} z0, {{ArgTypeAny}} length, {{ArgTypeAny}} width, {{ArgTypeAny}} height)====

''Example:boxline("my_boxmy_line",0,0,0,"x",y,100)''

Description: Draws a Box Line object in the scene under the currently activated Material Group node, or modifies a Box Line if Box Line 'label' already exists.

====cylinderline_rotated({{ArgTypeString}} label, {{ArgTypeAny}} x0, {{ArgTypeAny}} y0, {{ArgTypeAny}} z0, {{ArgTypeAny}} radiusrot_x, {{ArgTypeAny}} heightrot_y, {{ArgTypeAny}} rot_z, {{ArgTypeAny}} length)====

''Example:cylinderline_rotated("cylinder_1line_1",0,0,0,100,90,0,100)''

Description: Draws a Cylinder rotated Line object in the scene under the currently activated Material Group node. Unlike most other CAD functions, or modifies a Cylinder if Cylinder Line 'label' already existsin the scene,an error will be thrown.

====pyramidcircle({{ArgTypeString}} label, {{ArgTypeAny}} x0, {{ArgTypeAny}} y0, {{ArgTypeAny}} z0, {{ArgTypeAny}} base_xradius, {{ArgTypeAny}} base_ystart_angle, {{ArgTypeAny}} heightend_angle)====

''Example:pyramidcircle("pyramid_1",0,0,0,10,10,100)''

Description: Draws a Pyramid circular curve object in the scene under the currently activated Material Group node, or modifies a Pyramid Circle object if Pyramid Circle 'label' already exists. The parameters start_angle and end_angle are in degrees.

====spherehelix({{ArgTypeString}} label, {{ArgTypeAny}} x0, {{ArgTypeAny}} y0, {{ArgTypeAny}} z0, {{ArgTypeAny}} radiusnturns, {{ArgTypeAny}} start_angleradius_inner, {{ArgTypeAny}} end_angleradius_outer)====

''Example:spherehelix("sphereHelix_1",0,0,0,105,015,18050)''

Description: Draws a Sphere object helical curve in the scene under the currently activated Material Group node, or modifies a Sphere Helix if Sphere Helix 'label' already exists. The arguments start_angle radius_inner specifies the helix's radius at the beginning of the helix, and end_angle are in degrees and specify radius_outer specifies the radius at the end of the helix. ====poly_line({{ArgTypeString}} label, {{ArgType| 3x1 Python tuple}} p0, {{ArgType| 3x1 Python tuple}} p1, ... {{ArgType| 3x1 Python tuple}} pn)==== ''Example:poly_line("pl_1",(0,0,0),(1,0,0),(1,0,0))'' Description: Creates or modifies a sweep about PolyLine object in the spherescene. Each point is represented with a Python tuple type. The poly_line is closed if p0 is specified again as pn, otherwise, it is open. ====nurbs_curve({{ArgTypeString}} label, {{ArgType| 3x1 Python tuple}} p0, {{ArgType| 3x1 Python tuple}} p1, ... {{ArgType| 3x1 Python tuple}} pn)==== 's theta axis'Example:nurbs_curve("nc_1",(0,0,0),(1,0,0),(1,0,0))'' Description: Creates or modifies a NURBS Curve object in the scene. Each point is represented with a Python tuple type. The curve is closed if p0 is specified again as pn, otherwise, it is open.