==Running the Wire MoM Simulation==
[[Image:MOMTUT3 13.png|thumb|350px500px|The EM.Libera's Run dialog with Wire MoM solver and Single-Frequency Analysis selected.]]
At this time, your project is ready for the Wire MoM simulation of your dipole antenna structure. For wire structures, [[EM.Libera]] generates a wireframe mesh. It automatically detects whether your physical structure requires a surface mesh or a wireframe mesh. Open the Mesh Settings Dialog and change the value of '''Mesh Density''' to 30 cells per wavelength.
Z11: 77.464068 +41.698638j
Visualize the current distribution on the wire dipole. You can see the familiar sinusoidal current distribution on the wire with its peak at the center and zero current at the two ends.
Â
<table>
<tr>
<td>
[[Image:MOMTUT3 11.png|thumb|500px|The total current distribution on the wire dipole.]]
</td>
</tr>
</table>
Â
Next, visualize the 3D radiation pattern of the dipole antenna. You will see the familiar donut shape with a directivity of 1.64.
Â
<table>
<tr>
<td>
[[Image:MOMTUT3 12.png|thumb|500px|The total 3D radiation pattern of the half-wave dipole antenna.]]
</td>
</tr>
</table>
==Viewing the Simulation Results==