The Digital Wire Display section controls how wires are shown in pure Digital mode. "Color Wires by Value" toggles the option to display wires by color according to their values. You can set the low, high, unknown and conflict wire colors with the provided color palette buttons.
The Schematic Display section allows you to customize the appearance of the schematic. "Show Grid" turns the schematic grid on or off. "Show Schematic Border" toggles the top and left location borders. "Show Page Boundaries" shows the printed page boundaries as a dashed line. The printed page size and orientation can be changed from the "File > Page Setup" menu. "Show Title Box" toggles the Title Block for each page. "Show Node Names" toggles whether or not node data is displayed. This is useful for associating data from simulation results with actual nodes in the circuit. All these toggle functions can also be accessed from respective buttons on the [[Schematic Editor]]'s Toolbar. The "Text Field Font" button sets the font properties for text drawn with the Text Tool. The "Segment Color" and "Vertex Color" buttons are used to customize what colors the wires and vertices are shown in. The node names/node voltages/branch current/power fonts buttons control the various fonts used for the State Display fonts.
<b>General Tab</b>