* '''[[#Running a Single-Frequency Planar MoM Analysis | Single-Frequency Analysis]]'''
* '''[[Parametric_Modeling,_Sweep_%26_Optimization#Running_Frequency_Sweep_Simulations_in_EM.Cube | Frequency Sweep]]''': including uniform and adaptive frequency sweeps
* '''[[Parametric_Modeling,_Sweep_%26_Optimization#Running_Parametric_Sweep_Simulations_in_EM.Cube | Parametric Sweep]]'''
* '''[[Parametric_Modeling,_Sweep_%26_Optimization#Optimization | Optimization]]'''
* '''[[Building_Reusable_Models#Running_an_HDMR_Sweep | HDMR Sweep]]'''
You can set the simulation mode from EM.Picasso's "Simulation Run Dialog". A single-frequency analysis is a single-run simulation. All the other simulation modes in the above list are considered multi-run simulations. If you run a simulation without having defined any observables, no data will be generated at the end of the simulation. In multi-run simulation modes, certain [[parameters]] are varied and a collection of simulation data files are generated. At the end of a sweep simulation, you can graph the simulation results in EM.Grid or you can animate the 3D simulation data from the navigation tree.
=== Running a Single-Frequency Planar MoM Analysis ===