By default, the last defined trace or embedded object set is active. You can activate any trace or embedded object set at any time for drawing new objects. You can move one or more selected objects from any trace or embedded object set to another group of the same type or of different type. First select an object in the project workspace or in the Navigation Tree. Then, right click on the highlighted selection and select '''Move To >''' from the contextual menu. This opens another sub-menu containing '''Planar''' and a list of all the other [[EM.Cube]] modules that have already defined object groups. Select '''Planar''' or any other available module, and yet another sub-menu opens up with a list of all the available traces and embedded object sets already defined in your project. Select the desired group, and all the selected objects will move to that group. When selecting multiple objects from the Navigation Tree, make sure that you hold the keyboard's '''Shift Key''' or '''Ctrl Key''' down while selecting a group's name from the contextual menu.
Â
EM.Picasso does not allow construction of 3D CAD objects. Instead, you draw the cross section of prismatic objects as planar [[Surface Objects|surface objects]] parallel to the XY plane. [[EM.Cube]] then automatically extrudes these cross sections and constructs and displays 3D prisms over them. The prisms extend all the way across the thickness of the host substrate layer.
After a new embedded object set has been defined and added to the Navigation Tree, it becomes the active trace. You are now ready to create geometrical objects in the new active trace. Remember that [[Planar Module]] does not allow you to draw 3D objects. The solid object buttons in the '''Object Toolbar''' are disabled to prevent you from doing so. Instead, you draw planar [[Surface Objects|surface objects]] as the cross section of embedded sets. [[EM.Cube]] extends these planar objects across their host layer automatically and displays them as wire-frame, 3D extruded objects. Extrusion of embedded object sets happen after meshing and before every simulation. You can enforce this extrusion manually by right clicking the '''Layer Stack-up''' item in the '''Computational Domain''' section of the Navigation Tree and selecting '''Update Planar Structure...''' from the contextual menu.