Since its introduction in 2002, EM.Picasso has been successfully used by numerous users around the globe in industry, academia and government. The new EM.Picasso 2013 has been totally reconstructed based on our integrated [[EM.Cube]] software foundation. This integration has introduced far more powerful CAD utilities, greater geometrical variety, and a vast array of capabilities like parametric sweep, [[optimization]], data visualization and post-processing computations. The new foundation also facilitates import and export of many popular CAD formats and provides a seamless interface with our other simulation tools.
== A = An Overview of Planar Method Of of Moments Primer ===
The Method of Moments (MoM) is a rigorous, full-wave numerical technique for solving open boundary electromagnetic problems. Using this technique, you can analyze electromagnetic radiation, scattering and wave propagation problems with relatively short computation times and modest computing resources. The method of moments is an integral equation technique; it solves the integral form of Maxwellâs equations as opposed to their differential forms that are used in the finite element or finite difference time domain methods.
You couple two or more sources using the '''Port Definition Dialog'''. To do so, you need to change the default port assignments. First, delete all the ports that are to be coupled from the Port List of the dialog. Then, define a new port by clicking the '''Add''' button of the dialog. This opens up the Add Port dialog, which consists of two tables: '''Available''' sources on the left and '''Associated''' sources on the right. A right arrow ('''-->''') button and a left arrow ('''<--''') button let you move the sources freely between these two tables. You will see in the "Available" table a list of all the sources that you deleted earlier. You may even see more available sources. Select all the sources that you want to couple and move them to the "Associated" table on the right. You can make multiple selections using the keyboard's '''Shift''' and '''Ctrl''' keys. Closing the Add Port dialog returns you to the Port Definition dialog, where you will now see the names of all the coupled sources next to the name of the newly added port.
{{Note|It is your responsibility to set up coupled ports and coupled [[Transmission Lines|[[Transmission Lines|[[Transmission Lines|[[Transmission Lines|[[Transmission Lines|[[Transmission Lines|[[Transmission Lines|[[Transmission Lines|[[Transmission Lines|[[Transmission Lines|[[Transmission Lines|transmission lines]]]]]]]]]]]]]]]]]]]]]] properly. For example, to excite the desirable odd mode of a coplanar waveguide (CPW), you need to create two rectangular slots parallel to and aligned with each other and place two gap sources on them with the same offsets and opposite polarities. To excite the even mode of the CPW, you use the same polarity for the two collocated gap sources. Whether you define a coupled port for the CPW or not, the right definition of sources will excite the proper mode. The couple ports are needed only for correct calculation of the port characteristics.}}
[[File:PMOM51(2).png|800px]]