If you meet the description listed, please send us your resume. See the following
open positions for more information.
RF Electronic Research Engineer
Part Time RF Engineer
Full Time Fabrication Engineer
Full Time RF Design Engineer
Please fax or email your resume in confidence to:
Human Resources
EMAG Technologies, Inc.
775 Technology Drive - Suite 300
Ann Arbor, Michigan 48108
Email: info@emagtech.com
Fax: 1-734-996-3623
or see specific job positions for contact information.
JOB TITLE: RF ELECTRONIC RESEARCH ENGINEER
Job Description:
Design, fabricate, test, and characterize Si and GaAs micromachined devices including: MEMS, microfluidic, and RF. Generate layout designs for mask generation. Research and development in anodic and thermocompression wafer bonding, standard wet IC chemistries, RIE and DRIE, photolithography, metal deposition processes, SEM microscopy and metrology/characterization of RF devices. Comfortable developing and following fabrication processes and designs incorporating the above.
Requirements:
- MSEE
- One Year Experience
Courses must have included one each of:
- Plasma processing
- Fundamentals of MEMS
- Advanced Microfabrication of Semiconductor Devices
Human Resources info@emagtech.com
Fax: 734-996-3623
Web: www.emagtech.com
EMAG Technologies is an Equal Opportunity Employer
JOB TITLE: PART TIME RF ENGINEER
Job Description:
The Hardware group of EMAG Technologies, a Research and Development company focusing on RF Front-End solutions, is looking for a part time RF Engineer. The successful candidates will be a part of a high-energy team of engineers working in the area of RF, Microwave and Antennas. In this position you will be responsible for design and measuring RF circuits (PA, LNA, Mixer and Filters) operating from UHF to X-Band.
Requirements:
Candidates should also possess one or more of the following:- B.S. or M.S. degree in Electrical Engineering
- PCB design experience
- RF design and measurement experience
- Experienced using Spectrum Analyzer and Vector Network Analyzer
Human Resources info@emagtech.com
Fax: 734-996-3623
Web: www.emagtech.com
EMAG Technologies is an Equal Opportunity Employer
JOB TITLE: FABRICATION ENGINEER
Job Description:
EMAG Technologies Inc., a high-tech company specializing in integrated RF front-end solutions, is looking for dynamic Research Engineers. The successful candidates will be a part of a high-energy team of engineers working in the areas of Micromachining, RF Integrated Circuit Design and Microwave Circuit Design. This is a full-time position with full benefits, available immediately. Multiple positions with this job description are available at Ph.D., M.S., or B.S. levels which involve fabrication, and testing of high frequency circuits, specifically:
- Working with a team of RF engineers for designing, fabricating, and testing Si and GaAs micromachined RF circuits (wafer-scale antennas, filters, RF MEMS, RF MEMS varactors, and other passive and active MMIC)
- Complete layout designs for mask generation
- Following existing and developing new fabrication processes for Si and GaAs micromachined components
Requirements:
Candidates should also possess one or more of the following:- B.S. degree and at least 2 years of relevant experience or a M.S. degree in Electrical Engineering, Material Sciences, or similar
- Fabrication experience in the University of Michigan MNF/SSEL clean room
- Familiarity with wet chemical processing, wet/dry wafer etching, lithography, metal deposition (evaporation, sputtering, electroplating), thin-film deposition, wafer bonding
- Experience with the use of microscopes, SEM, Dektak and other wafer testing equipment
- Ability to follow already existing and develop new fabrication processes
- Use of layout design tools: IC Station, AutoCAD, ADS
- Experience with probe stations and vector network analyzers is desirable
- Strong written and verbal communication, presentation and planning skills are essential
Human Resources info@emagtech.com
Fax: 734-996-3623
Web: www.emagtech.com
EMAG Technologies is an Equal Opportunity Employer
JOB TITLE: RF DESIGN ENGINEER
Job Description:
The Hardware group of EMAG Technologies, a Research and Development company focusing on RF Front-End solutions, is looking for a RF Design Engineer. The successful candidates will be a part of a high-energy team of engineers working in the areas of Micromachining, RF Integrated Circuit Design and Microwave Circuit Design. This is a full-time position with full benefits, available immediately. The responsibilities of this position involve design and analysis of high frequency circuits, specifically:
- Working with a team of RF engineers for designing, fabricating, and testing Si and GaAs micromachined RF circuits (wafer-scale antennas, filters, RF MEMS, RF MEMS varactors, and other passive and active MMIC)
- Design, analysis and optimization of Si and GaAs micromachined components using HFSS, ADS, and Momentum
- Complete layout designs for mask generation
Requirements:
Candidates should also possess one or more of the following:- M.S. degree and at least 2 years of relevant experience or a Ph.D. degree in Electrical Engineering
- Strong background in electromagnetics, antenna theory and microwave circuit design
- Previous work in analysis and design of active RFIC (mixers, LNA, PA, diodes), passive MMIC (filters, RF MEMS, phase shifters, interconnects), and antennas
- Experience in analyzing electromagnetic structures using FEM, FDTD, MoM
- Knowledge of Ansoft HFSS, Agilent ADS, Agilent Momentum is preferred
- Use of layout design tools: IC Station, AutoCAD, ADS
- Strong written and verbal communication, presentation and planning skills are essential
Human Resources info@emagtech.com
Fax: 734-996-3623
Web: www.emagtech.com
EMAG Technologies is an Equal Opportunity Employer
